| |||||||||
R.J. Cyr Co. provides precision steel fabrication for manufacturing and
rebuilding operations, and to provide a high quality source for precision
metal cutting, metal forming, and metal joining and welding.
R.J. Cyr Co. provides steel fabrication services for companies throughout Ontario,
Alberta, and BC, also the US, Europe and Asia. We are . . . the OEM’s . . . OEM!
R.J. Cyr Co. has extensive in-house capabilities, and the ability to assure
highest quality and fastest turnaround to all provinces, and the US.
Our steel fabrication resources include 25,000 sq. ft. of manufacturing space,
a commitment to precision and the region’s most talented union shop professionals.
We are certified by the Canadian Welding Bureau to Standard W47.1 and have
full-time welding engineers. In our shop, no job is too big . . . or too small!
Highlights of our steel fabrication capabilities include:
R.J. Cyr Co. shearing capabilities include a heavy-duty, high-capacity Haco shear. Hydraulic and numerically-controlled, its capability ranges to steel plate 5/8” X 13’ long.
Two Press Brakes, manufactured by Pacific and Amada Promecam, have capacities
of 400 and 200 tons respectively; maximum gage, 2”, maximum length 12’.
STRUCTURAL BEAM, ANGLE, BAR AND PIPE ROLLING
R.J. Cyr Co. clients manufacture everything from metal buildings, structural steel fabrications, overhead monorail conveyors, handrails – to break walls. R.J. Cyr Co.
uses a Pullmax Z-41 with a capacity of 5" X 5" X ˝" angle channel, beam and flats.
We also operate a 220-ton Beatty Hydraulic Press.
PLASMA OXY-ACETYLENE AND PRODUCTION SAW CUTTING
The system allows stainless steel and up to 1" aluminum. Maximum cutting
gap 10 x 10, speeds are 5-500-1/2".
For cutting, including flat, rounds, hollows and structural, R.J. Cyr Co. resources
include a HEMSaw automatic double-column, wide-flange band saw for material
up to 18"X36", with a + or –.005 repeatability on cut length. Other advanced
fabrication capabilities are possible with our high-speed gantry thermal cutting
system, the Gemini 10. The system allows processing using conventional oxyfuels,
as well as a Hypertherm HT2000 plasma system for stainless steel and up to
1" aluminum. Maximum cutting gap 10 x 10, speeds are 5-500-1/2".
For mitering, R.J. Cyr Co. uses a Hyd-Mech V-Series vertical tilt head saw to
miter up to 45° left or right. The system is designed for continuous operation
and has cutting capacity up to 30”.
Other machine shop resources include 2 lathes, 1 horizontal mill, 1 vertical mill,
6' radial drill, 100 ton H frame press.
R.J. Cyr Co. specializes in quality rebuilding of material handling and production
equipment made by all manufacturers. We are best-known for our decades of
refurbishing Heppenstall handling devices. The problems are similar: pivot points
are worn, damaged or bent. Pins and bushings are out of tolerance. Links, arms
and latches require re-machining or replacement. Cracks must be identified using
magnaflux, or magnetic particle detection, and repaired where needed. R.J. Cyr Co.
technicians restore Heppenstall tongs to their original specifications at a fraction
of the cost of new units.
CONVEYORS | CRANES | DESIGN ENGINEERING | STEEL FABRICATION | INSPECTION, REPAIRS, INSTALLATION
R.J. CYR CO., INC.
Windsor, Ontario Canada
www.rjcyr.com
© R.J. CYR CO. INC. All rights reserved.